Clearaudio Statement Phono Preamplifier
29000,00 €
The analogue Statement Phono preamplifier, featuring a completely symmetrical circuit and the capability to adjust any equalization curve, stands as one of the most versatile and advanced phono preamplifiers globally. The use of meticulously selected electronic components, including ultra-low noise resistors and lossless silver-glimmer capacitors, contributes significantly to achieving this remarkable performance.
Overview
This sound laboratory in miniature is unique and unmatched in the analogue world. The statement phono is at home at the absolute top – where the air is thin, but the sound quality reaches its maximum density. From the deepest bass to the highest treble, from the additional bass octave of an imperial grand piano to the piccolo flute of a full church organ and beyond, the statement phono presents sounds exactly as they are. It takes nothing away and does not add anything, but embodies the ideal of pure music reproduction.
Silver mica capacitors ensure that the signals are handled without loss. Only the most noise-free resistors and capacitors, carefully selected, are worthy to take their place on the circuit boards of this monumental twelve kilogram phonostage.
This phonostage does not compromise. But it does allow you to connect and control the volume of all major sources via two phono inputs and two additional analogue inputs. For power, an external battery power supply is used, so that interference from the mains electricity grid does not exist.
The statement phono embodies the ultimate truth of listening, and with its switchable input resistors and freely adjustable equalisation curves, addresses the needs of discerning analogue fans that want to extract the best sound from their records. This sound laboratory in miniature is unique and unmatched in the analogue world.
| Mode: | MM / MC switchable, Subsonic filter switchable |
| Amplification: | + 34dB (MM mode), + 54dB (MC mode) |
| Input load: | 47kΩ (MM mode), 25Ω - 10kΩ (MC mode) |
| RIAA accuracy: | ± 0.05dB / 20 - 100kHz |
| THD: | 5mV / 1kHz / +50dB: < 0.0035%, 0.5mV / 1kHz / +70dB: < 0.0015% |
| Signal to noise ratio: | 5mV / 1kHz / +50dB: -82dB / -90dB (A-weighted), 0.5mV / 1kHz / +70dB: -72dB / -80dB (A-weighted) |
| Headroom: | + 25dB |
| Max. output voltage: | > 12V |
| RIAA: | 75μs / 318μs / 3180μs, 2 passive filter |
| Channel seperation: | > 80dB (at 1kHz) |
| Output impedance: | 10Ω |
| Inputs: | Phono 1: balanced XLR (rear), Phono 2: unbalance RCA (rear), Line 1: balanced XLR (rear), Line 2: unbalanced RCA (rear), AUX: Jack 3.5mm (front) |
| Outputs: | unbalanced (RCA), balanced (XLR), headphone output (Jack: 6.3mm) |
| Power consumption: | Max. consumption: 200 watts, In operation: 50 - 100 watts, Standby mode: < 0.5 watts, Off mode: 0.0 watts |
| Power supply: | Fully symmetrical line and Accu - power supply |
| Main power / channel: | 2 × 2 × 22V / 1A |
| Battery power / channel: | 2 × 18V / 3.2Ah |
| Total weight preamplifier: | Approx. 12kg |
| Total weight power supply: | Approx. 22kg |
| Dimensions preamplifier (W/D/H): | Approx. 435 × 350 × 100mm |
| Dimensions preamplifier (W/D/H): | Approx. 17.13 × 13.78 × 3.94 inches |
| Dimensions power supply (W/D/H): | Approx. 435 × 350 × 100mm |
| Dimensions power supply (W/D/H): | Approx. 17.13 × 13.78 × 3.94 inches |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Clearaudio Balance Reference Phono Preamplifier
Clearaudio Da Vinci V2 Moving Coil Cartridge
Clearaudio Goldfinger Statement V2.1 Moving Coil Cartridge
Clearaudio Jubilee Moving Coil Cartridge
Clearaudio Statement TT1 Tonearm
Clearaudio Unity 10″ Tonearm
As the name suggests, the Clearaudio tonearm unites the proven single-point bearing with a newly developed magnetic stabilization design. Immerse yourself in a world of unparalleled sound quality and precision with the Clearaudio Unity tonearm. A masterpiece of engineering, it combines the legendary single-point bearing with innovative magnetic stabilization, setting new standards in vinyl playback.
