JBL Synthesis SCL-7 In-Wall Speaker
1199,00 €
The SCL-7 is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a width or surround channel or as an LCR in smaller systems. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI) horn. The SCL-7 isacoustically designed to match any of the JBL SCL series as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.
Overview
The SCL-7 is the smallest in-wall model in the expanded in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high-performance immersive audio systems in small to medium-size rooms. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision-molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. Premium components are used throughout the crossover network including a boundary gain adjustment switch while high-quality gold-plated push-type speaker terminals ensure a secure connection. Installation is simple and quick with the new Cat Claw mounting mechanism that allows the speaker to be securely clicked into place freeing up two hands for tightening it down flush and level to the wall. A zero bezel magnetically attached grille is included and can be painted to match any décor. The SCL-6 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesisimmersive audio solution.
Type: | 2-Way In-wall loudspeaker |
Low Frequency Driver: | Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4) |
High Frequency Driver: | 1″ (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver |
Recommended Amplifier Power: | 25 – 150W RMS |
Impedance: | 4 Ohm |
Loudspeaker Sensitivity: | 88 dB/2.83V/1m (2pi anechoic) |
Frequency Response: | 55Hz – 30kHz (-6 dB on-axis), 2pi anechoic |
Crossover Frequency: | 2.0 kHz |
High Frequency Coverage Angle (-6 dB): | 60° Vertical, 90° Horizontal (Left 30°, Right 60°, from center line), from 2 kHz to 15 kHz |
Enclosure Type: | Open back |
Controls: | Boundary Proximity Control |
Grille Dimensions: | 7.32” (186 mm) x 19.15” (486 mm) |
Product Dimensions (with grille): | 7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm) |
Cut-out Dimensions: | 6.18” (157 mm) x 18.03” (458 mm) |
Rough-in Bracket: | WB52 |
Mounting Depth: | 3.64” (93 mm) |
Input Type: | Gold-plated spring-loaded binding posts |
Product Weight: | 12.6 lbs (5.72 kg) |
Shipping Weight: | 14.6 lbs (6.62 kg) |
Shipping Units of Measure: | Each |


TASUTA TARNE ÜLE EESTI *
Eestisisesed saadetised jõuavad üldjuhul ostja määratud sihtpunkti 3-5 tööpäeva jooksul alates müügilepingu jõustumist. Leping jõustub alates tasumisele kuuluva summa laekumisest Veebipoe arvelduskontole.
*Üle 100€ tellimuste puhul
Oma kaupade järgi võib ka tulla kohapeale, aadressile Kallaste 7, Tabasalu
VEEBIPOE OMANIK
Veebipoe hifimarket.ee omanik on Audio Sommelier OÜ (registrikood 16891515), asukohaga Kallaste, 7, Tabasalu keskus, 76901